Garden State Diesel – Products & Services Page
Phone: 856-914-9797
Fax: 856-914-0007
Email: Parts@GardenStateDiesel.com
Location: 97 Foster Road Suite 4, Moorestown, NJ 08057
Garden State Diesel – serving the Tri-State area since 1948.
Fuel Injectors – Mechanical Unit Injectors (MUI), Electronic Unit Injectors (EUI), Hydraulic Electronic Unit Injectors (HEUI) and Common-Rail Injectors (CR) - Testing, Exchange or Reman.
Our remanufacturing process starts with complete dismantling, all parts are thoroughly cleaned and inspected, worn parts are reconditioned or replaced to ensure high quality and durability, reassembled with new rings and gaskets, calibrated to meet OEM specifications and pressure tested.
Injector Testing: With our state of the art test stands, we have full testing capabilities on site to test mechanical, HEUI, common rail and Electronic Unit Injectors. We can test!
Fuel Injection Pumps: Rotary, In-Line, Unit and Common Rail - Exchange or Reman
We start the remanufacturing process by completely disassembling the pump, it is then thoroughly cleaned and inspected, and worn parts are reconditioned or replaced to ensure high quality and durability. The pump is reassembled and installed on our state-of-the-art test bench where every feature is calibrated to OEM specifications.
Turbocharger: Components, Exchange or Reman
Our remanufacturing process starts with complete dismantling, and each part is inspected for defects. All bearings, seals and rings are discarded. Each part is thoroughly cleaned. All component parts are re- inspected and renewed to spec. Reassembled with new bearings, seals and rings and all wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation. 100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
Engine Components and Engine Kits: High quality In-Frame and Out of Frame engine kits for most manufacturers.
Starter and Alternators: New, No core Required. 2-Year Warranty, Unlimited Mileage.
Cylinder Head Reman – Cleaned, checked and repaired where needed, pressure tested, machined and assembled to OEM specs. Vacuum tested to insure valve sealing.
We offer DuraFit diesel particulate filters for sale for most makes & models.
Fuel Additives and Filters: Stanadyne Performance Formula, Stanadyne Lubricity Formula, Stanadyne Winter 1000, Stanadyne Performance Formula Jr., RACOR Filters, Alliant Power Ultraguard, Lubriguard and Winterguard. Stanadyne fuel additives are the only ones in the world that are made by a fuel injection systems manufacturer, Tested and approved by major diesel engine and vehicle manufacturers, and Proven to perform best in independent tests.
Phone: 856-914-9797
Fax: 856-914-0007
Email: Parts@GardenStateDiesel.com
Location: 97 Foster Road Suite 4, Moorestown, NJ 08057
Garden State Diesel – serving the Tri-State area since 1948.
Fuel Injectors – Mechanical Unit Injectors (MUI), Electronic Unit Injectors (EUI), Hydraulic Electronic Unit Injectors (HEUI) and Common-Rail Injectors (CR) - Testing, Exchange or Reman.
Our remanufacturing process starts with complete dismantling, all parts are thoroughly cleaned and inspected, worn parts are reconditioned or replaced to ensure high quality and durability, reassembled with new rings and gaskets, calibrated to meet OEM specifications and pressure tested.
Injector Testing: With our state of the art test stands, we have full testing capabilities on site to test mechanical, HEUI, common rail and Electronic Unit Injectors. We can test!
- Mechanical Injectors We will pop test, check spray pattern and reset to OEM spec.
- Common Rail We have the only certified Bosch test stand in New Jersey and can test GM Duramax, Cummins, Volvo, Isuzu, Sprinter, Ford 6.4L and 6.7L, John Deere and PACCAR common rail injectors. Our comprehensive testing includes leak test, injector start behavior (without return flow counter-pressure), ISA tuning, Full load quantity (VL), pilot injection quantity (VE), idle quantity (LL), emission quantity (EM) and actuator resistance.
- HEUI Injectors Testing includes fuel delivery at start, idle, partial and full load. We can test Caterpillar 3126, 3408, 3412, C7 and C9; Ford 7.3L and 6.0L; Navistar / International T444E, DT466E VT365, VT275, I530E, HT530, HT570, MaxxForce 5, MaxxForce DT, MaxxForce 9 and MaxxForce 10; Perkins 7.6L & 8.7L 1300 Series EDI
- Electronic Unit Injectors and Pumps We currently can test Cummins Celect, Caterpillar C10, C12, C15 and 3406E, Detroit Diesel Series 60, N2 & N3; and Mack EUP’s. We plan on adding test adapters in order to test Volvo Bosch and Delphi series, Mercedes EUP’s, John Deere Delphi, Bosch Iveco 8L, Cursor 10L & 13L, Bosch Scania 11L, 12L & 16L.
Fuel Injection Pumps: Rotary, In-Line, Unit and Common Rail - Exchange or Reman
We start the remanufacturing process by completely disassembling the pump, it is then thoroughly cleaned and inspected, and worn parts are reconditioned or replaced to ensure high quality and durability. The pump is reassembled and installed on our state-of-the-art test bench where every feature is calibrated to OEM specifications.
Turbocharger: Components, Exchange or Reman
Our remanufacturing process starts with complete dismantling, and each part is inspected for defects. All bearings, seals and rings are discarded. Each part is thoroughly cleaned. All component parts are re- inspected and renewed to spec. Reassembled with new bearings, seals and rings and all wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation. 100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
Engine Components and Engine Kits: High quality In-Frame and Out of Frame engine kits for most manufacturers.
Starter and Alternators: New, No core Required. 2-Year Warranty, Unlimited Mileage.
Cylinder Head Reman – Cleaned, checked and repaired where needed, pressure tested, machined and assembled to OEM specs. Vacuum tested to insure valve sealing.
We offer DuraFit diesel particulate filters for sale for most makes & models.
- High-grade stainless-steel canisters improve durability and resist corrosion
- Advanced filter coatings and substrates ensure effective regeneration
- Tested to reduce backpressure and enhance performance
- Improved thermal stability and efficiency
- Backed by an 2-year, unlimited mileage warranty
- NEW, No Core required
Fuel Additives and Filters: Stanadyne Performance Formula, Stanadyne Lubricity Formula, Stanadyne Winter 1000, Stanadyne Performance Formula Jr., RACOR Filters, Alliant Power Ultraguard, Lubriguard and Winterguard. Stanadyne fuel additives are the only ones in the world that are made by a fuel injection systems manufacturer, Tested and approved by major diesel engine and vehicle manufacturers, and Proven to perform best in independent tests.